17
NOTE
● Do NOT press your punctured site against the test strip or try to
smear the blood.
● Always apply a blood sample after the test strip is inserted into your
meter.
● If you do not apply a blood sample to the test strip within 1 minute,
your meter will automatically turn off. You must remove and reinsert
the test strip to start a new test.
● The confirmation window should be filled with blood before your
meter begins to count down. NEVER try to add more blood to the
same test strip. Discard the used test strip and retest with a new
one.
● If you have trouble filling the confirmation window, please contact
your health care professional or GlucoRx Customer Care for
assistance.
6. Read Your Result
The result of your test will appear after the meter counts down to 0.
The result will be stored in the meter memory automatically.
7. Eject the used test strip (k)
Eject the test strip by pushing the eject button on the side. Use a
sharps bin to dispose of used test strips. Your meter will switch off
automatically.
Always follow instructions in the lancing device insert when
removing the lancet.
WARNING
● The used lancet and test strip are considered biohazardous. Please
discard them carefully according to your local regulations.
● Clean and disinfect your meter and lancing device after each test
using a disinfecting wipe.
To Next Page
Loading...
