33
● Keep test strips away from children since the vial cap and strip may
be a choking hazard. If swallowed, urgently see a doctor for help.
For more information, please refer to the test strip insert.
Batteries
Your meter comes with two 1.5V AAA size alkaline batteries.
Low Battery Signal
Your meter will display one of the messages below to alert you when
the meter power is getting low
1. When the “
” symbol appears along with display messages
Your meter is functioning properly and the result remains accurate, but
it is time to change the batteries.
2. When the “
” symbol appears with E-b, and Low:
Your power is too low to perform a test. Please change the batteries
immediately.
Replacing the Batteries
To replace the batteries (l), make sure your meter is turned off.
1. Press the edge of the battery cover and lift it up to remove.
2. Remove the old batteries and replace with two 1.5V AAA size
alkaline batteries.
3. Close the battery cover. If the batteries are inserted correctly, you will
hear a “beep” afterwards.
To Next Page
Loading...
