Glutz eAccess - Identifiers

To Next Page

To Previous Page

www.glutz.com

- 12 -

System overview

2.4 Identiﬁers

Dierent identiers (ID) are required in the «eAccess» system for dierent purposes. The number of deci-

mal places used in the identier issued enables you to recognise what kind of identier it is:

f 8 decimal places: system ID

f 9 decimal places: device ID

f 10 decimal places: media ID

System ID

The system ID allows a system to be clearly identied throughout Glutz. It is used in communication with

Glutz Support and also as part of the procedure for ordering a subsequent system card.

Media ID

The user media and plus and minus cards sold by Glutz are marked with a media ID. The user medium

can be clearly identied via this 10-digit identier. Knowing the ID allows the media to be deleted from

the device without physical access. User media produced by third-party manufacturers do not have a Glutz

Media ID.

Device ID

The device can be clearly identied via the device ID. Each device has a unique device ID. It is used for the

specic identication of that device.

UID Media

Third-party media can also be used on the eAccess system (e.g. media for drink vending machines, etc.).

Using UID media is less secure when compared to the Glutz system standard. In order to use UID media,

the devices must be activated individually. For security reasons, the device standard for UID media is de-

activated.