www.glutz.com
- 28 -
6 Maintenance
The devices are made from stainless steel or brass and plastic. Clean the housings and lever handles with
commercially available cleaning agents and soft cloths. Do not use any solvents.
6.1 Cleaning
NOTE
Plastic cover
Only clean the plastic cover on the exterior plate with a soft, damp cloth.
6.2 Replacing batteries
Batteries must be replaced when the warning ‘Battery status critical’ is given.
CAUTION
Lithium batteries
Do not charge, short-circuit, pierce, deform, dismantle, heat to over 85°C, burn or bring the battery into
contact with water. Keep batteries away from small children. International standard IEC 60086-4 contains
further information about the safety of lithium batteries.
Alkaline manganese batteries
Do not charge, short-circuit, pierce, deform, dismantle, heat to over 85°C, burn or bring the battery into
contact with water. Keep batteries away from small children. International standard IEC 60086-5 contains
further information about the safety of alkaline batteries.
Handling and storage
• Prevent short-circuiting of the battery terminals.
• Preferably store in cool (under 30°C) and dry conditions, with no significant fluctuations in temperature.
• Do not store close to heating elements or expose to direct sunlight for a long period. High temperatures
can shorten battery life.
LED/colour Buzzer Application/function
Batteries must be replaced
urgently.
or or3x
3x
To Next Page
Loading...