Glutz eAccess - Signals During Card Programming

www.glutz.com
- 36 -
8.4 Signals during card programming
Signals
LED/colour Buzzer Description
f Not authorised
f UID mode not activated
f Software programming mode
f Entering programming mode
f The blue LED flashes whilst pro
-
gramming mode is active
f Process not yet completed
(e.g. input using number cards)
f Process successfully completed
f If the process continues for longer than
200 ms after the last card, both of the
upper LEDs will intermittently flash
orange (frequency approx. 2 Hz) before
the green LED appears
f Process not successfully completed
f If the process continues for longer than
200 ms after the last card, both of the
upper LEDs will intermittently flash
orange (frequency approx. 2 Hz) before
the green LED appears
f Programming mode exited (process
completed)
rd
rd
rd
3x
2x
3x
2x
2x
or or
2x
bl
bl
gr