- 31 -
Maintenance
E-reader (battery-operated)
For E-readers, only Glutz battery packs may be used.
Device reboot
Once the batteries have been changed, the device will reboot. This may take a few seconds.
For software-controlled E-devices, it may also be necessary to check and/or reset the built-
in real-time clock after a battery change. To do this, please follow the operating procedure
in the eAccess software.
Image Description
• Remove the E-reader
• Unplug the connector carefully!
• Replace the Glutz battery pack
• Reconnect carefully
• Re-fit the E-reader
To Next Page
Loading...