GMG 1930ED - Page 31

Page 31 of 52
Operating Instructions
6.4.2.A TO STEER
1. Toggle this switch to the DOWN position for Drive function.
2. Press and hold the FUNCTION ENABLE SWITCH on the CONTROL HANDLE.
3. Turn the steer wheels with the THUMB ROCKER SWITCH located on the top of the
CONTROL HANDLE.
1. Activate the Drive-functions by pressing the DRIVE-FUNCTIONS BUTTON.
2. Press and hold the FUNCTION ENABLE SWITCH on the CONTROL HANDLE.
3. Turn the steer wheels with the THUMB ROCKER SWITCH located on the top of the
CONTROL HANDLE.
6.4.2.B TO STEER
6.4.1.C TO POSITION PLATFORM
1. Activate the Lifting-functions by pressing the LIFT-FUNCTION BUTTON.
2. Press and hold the FUNCTION ENABLE SWITCH on the CONTROL HANDLE.
3. Pull the CONTROL HANDLE forward/reverse to raise the platform.
4. Push the CONTROL HANDLE forward/reverse to lower the platform
1. Activate the Drive-functions by pressing the DRIVE-FUNCTIONS BUTTON.
2. Press and hold the FUNCTION ENABLE SWITCH on the CONTROL HANDLE.
3. Turn the steer wheels with the THUMB ROCKER SWITCH located on the top of the
CONTROL HANDLE.
6.4.2.C TO STEER