B-3
QUICK OPERATING INSTRUCTIONSUSER HANDBOOK
WARNING: To prevent ignition of flammable or combustible
atmospheres, remove batteries before servicing.
WARNING: To prevent ignition of flammable or combustible
atmospheres, read, understand and adhere to the manufacturer’s
live maintenance procedures.
WARNING: To reduce the risk of ignition of a ammable or explosive
atmosphere, batteries must be changed only in a location known to
be non-hazardous.
WARNING: To reduce the risk of explosion, do not mix old batteries
with used batteries or mix batteries from different manufacturers.
WARNING: Never attempt to recharge non rechargeable cells.
CAUTION: Not for use in oxygen enriched atmospheres.
CAUTION: Replace batteries only with approved batteries:
ATEX / IECEx APPROVED INSTRUMENTS:
Refer to ‘SPECIAL CONDITIONS FOR SAFE USE’ on page iii.
UL APPROVED INSTRUMENTS:
Alkaline: Any ‘LR14’ type
Rechargeable NiMH: Any ‘C’ type
AREAS OF USE
Exposure to certain chemicals can result in a loss of sensitivity of the
ammable sensor. Where such environments are known or suspected
it is recommended that more frequent response checks are carried
out. The chemical compounds that can cause loss of sensitivity
include Silicones, Lead, Halogens and Sulphur. Do not use instrument
in potentially hazardous atmospheres containing greater than 21%
Oxygen. The enclosure material is polypropylene and must not be
exposed to environments which are liable to result in mechanical or
thermal degradation or to damage caused by contact with aggressive
substances. Additional protection may be required in environments
where the instrument enclosure is liable to damage.
To Next Page
Loading...
Need help?
General
