3-10
OPERATING PROCEDUREUSER HANDBOOK
4. Service Due Date message is displayed with user
acknowledge for extended period option, if overdue.
Service Due Date message
is displayed, as shown in
Fig. 3.23.
Fig. 3.23 Service Due Date
Fig. 3.24 Service Overdue
If overdue but within the
‘extended period’, the
screen, shown in Fig. 3.24,
is displayed.
The user must acknowledge that Service has expired.
Note: The extended period can be set from 1 to 31 days
To accept ‘extended period’ option:
• Press and hold YES and the instrument warm-up continues.
Note: When the extended period option expires, the user will
be forced to switch the instrument OFF.
To reject ‘extended period’ option:
• Press and hold NO .
Fig. 3.25 Switch OFF
The screen shown in Fig.
3.25 is displayed.
To Next Page
Loading...
