21
3 Setting and Control for Operation Panel
3.5 Active / Sleep / Shutdown / Charge Mode
Sleep Mode = LED active. Power saving model.
Active Mode：
All functions active. On active mode, receiving a print job. Go to Sleep mode if no operation over 30~3600 seconds
in Active mode.
Sleep Mode：
Only FEED button functions active. Go to Shutdown mode if no operation and over 30~3600 seconds to forever in Sleep
mode.
Shutdown Mode：
All function off except Power button and battery charge. Wake up to Sleep mode by pressing the Power button.
Charge Mode：
Only charge function active when the battery is charging. When battery is fully charged, the battery LED will turn green.
To Next Page
Loading...
