28
Step2: Registration
Disconnect the wifi between_your PC and inverter, reconnect
to local router. Browse http://www.goodwe-power.com
, and
click the “Register” button. Select “End User” as user type, fill
in the register table and the registration is completed.
Step3: Create PV Station
Fill in the table of the “New Station” web page according to
the actual location of your station. In the “WIFI Inverter
Information” column, enter the information of the inverter
including S/N, Check Code, Type and Description, and click
“Add” button. Then you can browse the website.
If you have several WIFI type inverters in one PV station, you
need to enter their information one by one.
ONLY for non-WIFI type inverter connected with EzLogger
Step1: Get EzLogger
Check the user manual of EzLogger. Follow the steps and
ensure your inverters are connected with EzLogger.
Step2:
Registration
Browse http://www.goodwe-power.com, and click the
“Register” button.
Select “End User” as user type, fill in the register table and the
registration is completed.
To Next Page
Loading...
