43
month (e.g. 01~12); the seventh and the eighth numbers
represent the date (e.g. 01~31). The remaining numbers
represent the time. The ninth number will be flicking firstly,
and number 0, 1 or 2 can be chosen by short pressing the
key. Long Press (2S) the key to move to the tenth number. A
number from 0 to 9 can be chosen by short pressing the key.
“Minutes” can be set with the same steps as the “Hour”. The
inverter will store the time after 20 seconds of no key
operation, the LCD will automatically return to the main
menu and the backlight will switch off.
` From the first level Set Time menu, short press the key once
to enters set protocol display menu. Press the button for 2S
to enter the second level menu. The circulatory submenu
including two protocols can be found. The protocol can be
chosen by short pressing the key. The inverter will store the
chosen protocol without any action within 20S and LCD
display will automatically return to main menu when the
backlight is off.
` From set protocol display menu, short press the key once to
enter the Wireless ID Reset menu. Long press 2S the key to
commence wireless ID resetting. 15 seconds later the result
of ID resetting will be displayed. 5 seconds later the display
will return to the main menu when the backlight is off.
` From wireless ID reset display menu, short press the key
once to enters WIFI reset display menu. Press the button for
To Next Page
Loading...
