44
2S to put wireless ID under resetting. 15S later the result of
ID resetting will be displayed. 5S later it returns to main
menu and the backlight becomes off.
` From WIFI reset display menu, short press the key once to
enters WIFI reload display menu. Press the button for 2S to
put WIFI under reloading. 15S later the result of reloading
will be displayed. 5S later it returns to main menu and the
backlight becomes off.
` From WIFI reload display menu, short press the key once to
enter 70% rated power menu. 70% rated enable means to
limit the inverter working under 70% or it’s rated output
power. Recover Rated Power means to recover inverter to
100% of it’s output power.
Notice : The function could only be used by network
operator for German. Otherwise it could cause the PV plant
generate less power.
F Normal Start and Operation Display
` When the input voltage reaches the inverter turn-on voltage,
the LCD starts to work, the yellow light is on, and the LCD
displays “Waiting”. More information will be displayed
within a few seconds. If the inverter is connected to the grid,
“Checking 30” will be displayed and a countdown will
commence from 30 seconds. When it shows “00S” you will
hear the relay triggered 4 times. The LCD will then display
To Next Page
Loading...
