Goodwe HT Series User Manual

28
06 Electrical Connection
User Manual V1.1-2022-07-20
NOTICE
• Make sure that the cables are connected correctly and rmly after connections. Clean all the
debris in the maintenance compartment.
• Seal the AC output terminal to ensure the Ingress Protection Rating.
6.5 Communication
6.5.1 Connecting the Communication Cable
NOTICE
Make sure that the communication device is connected to the right COM port. Route the
communication cable far away from any interference source or power cable to prevent the
signal from being inuenced.
RS485+
Ethernet
RS485-
L1
L2
L3
N
PE
CT
CT
CT
......
Three-phase
circuit breaker
Inverter 1Inverter N
SEC1000
Router
Meter
Grid
Cloud
Power limit networking scenario
After completing cable connections, set related parameters via LCD or SolarGo app to enable
export power limit control or output power limit control.
M8
7~9N·m
3
M5
2.5~3N·m
1
L2
PE
2
2
2
2
3
L1
N
L3
M12
25~30N·m
2

Goodwe HT Series Specifications

General

Max DC Input Voltage	1100V
MPPT Voltage Range	200-1000V
Max AC Output Power	3.6kW to 10kW
Number of MPPTs	1 or 2
Max PV Input Voltage	1100V
MPPT Range	200-1000V
AC Output Frequency	50/60Hz
Communication	RS485, Ethernet
Operating Temperature Range	-25°C to 60°C
Protection Level	IP65