Goodwe HT Series User Manual

33
User Manual V1.1-2022-07-20 06 Electrical Connection
6.5.2 Installing the Communication Module (optional)
Plug a communication module into the inverter to establish a connection between the inverter
and the smartphone or web pages. The communication module can be a WiFi module, or 4G
module. Set inverter parameters, check running information and fault information, and observe
system status in time via the smartphone or web pages.
NOTICE
• Refer to the delivered communication module user manual to get more introduction to the
module. For more detailed information, visit https://en.goodwe.com/.
• Remove the communication module using the unlock tool. The manufacturer shall not be
liable for the port damage if the module is removed without the unlock tool.

Goodwe HT Series Specifications

General

Max DC Input Voltage	1100V
MPPT Voltage Range	200-1000V
Max AC Output Power	3.6kW to 10kW
Number of MPPTs	1 or 2
Max PV Input Voltage	1100V
MPPT Range	200-1000V
AC Output Frequency	50/60Hz
Communication	RS485, Ethernet
Operating Temperature Range	-25°C to 60°C
Protection Level	IP65