Gooxi G2SERO-B User Manual

Version: V1.1 127
To avoid disk failure, do not perform other operations while erasing physical disk data.
2. Erase logical disk data
a) As shown in Figure 4-105, select the logical disk to be erased on the VD Mgmt interface and press F2.
Figure 4- 105
b) Enter the interface shown in Figure 4-106, select the erase mode (the default mode is recommended to
use Simple), and press Enter.
Figure 4- 106

Gooxi G2SERO-B Specifications

General

Brand	Gooxi
Model	G2SERO-B
Category	Motherboard
Language	English