Gooxi G2SERO-B User Manual

Version: V1.1 128
c) Enter the interface shown in Figure 4-107, select Yes, and press Enter to erase the logical disk data.
Figure 4- 107
Clear disk RAID information:
This function is used to clear the residual RAID information in the disk, so the disk can be used to
configure RAID again. This function is often used for disks in Unconfigured Bad mode.
a) Switch the disk mode from Unconfigured Bad to Unconfigured Good.
b) As shown in Figure 4-108, in Foreign View interface, select RAID card, press F2, select Foreign
Config->Clear, and press Enter.

Gooxi G2SERO-B Specifications

General

Brand	Gooxi
Model	G2SERO-B
Category	Motherboard
Language	English