Setup
3A1177B 11
Unclogging Spray Tip
1. To UNCLOG tip obstruction, engage trigger
lock.
2. Point arrow-shaped handle backward to
UNCLOG position.
3. Aim gun at piece of scrap or cardboard.
4. Unlock trigger lock. Pull trigger to clear clog.
5. When obstruction is cleared, engage trigger
lock and rotate arrow-shaped handle back to
SPRAY position.
Point the arrow-shaped handle on the spray tip for-
ward to SPRAY and backward to UNCLOG
obstructions.
To avoid fluid splash back:
• Never pull gun trigger when arrow-shaped
handle is between SPRAY and UNCLOG
positions.
• Tip must be pushed all the way into guard.
ti8908a
ti9048a
ti8909a
ti9049a
To Next Page
Loading...
Need help?
General
