Cleanup
18 3A1177B
Filling Sprayer with Storage Fluid
1. Remove inlet strainer. Place suction tube in storage
fluid bottle and prime tube in waste pail.
2. Turn Prime/Spray valve to PRIME.
3. Turn pressure control knob all the way left (counter-
clockwise) to minimum pressure.
4. Turn ON power switch.
5. Align arrow on sprayer with roller symbol on pres-
sure control knob.
6. When storage fluid comes out of prime tube (5-10
seconds) turn OFF power switch.
7. Turn Prime/Spray valve to SPRAY to keep storage
fluid in sprayer during storage.
•
Always pump storage fluid through pump system after
cleaning. Water left in sprayer will corrode sprayer and
damage pump.
ti2057a
ti2019a
ti2020a
ti2028a1
ti2058a
ti2059a
ti2044a
To Next Page
Loading...
