Pressure Relief Procedure
35
Pressure Relief Procedure
1. Relieve pressure in gun and perform gun
shutdown procedure. See gun manual.
2. Close gun fluid manifold valves A and B.
3. Shut off feed pumps and agitator, if used.
4. Turn PRESSURE RELIEF/SPRAY valves
(SA, SB) to PRESSURE RELIEF/CIRCU-
LATION . Route fluid to waste contain-
ers or supply tanks. Ensure gauges drop to
0.
5. Engage gun piston safety lock.
6. Disconnect gun air line and remove gun
fluid manifold.
ti2421a
ti9879a
SA
SB
ti2409a
ti2554a
To Next Page
Loading...
