Maintenance
3A2776K 61
Clean the System
1. Ensure all equipment is grounded. See Grounding,
page 19.
2. Ensure the area where the sprayer will be cleaned
is well ventilated and remove all ignition sources.
3. Turn off all heaters and allow equipment to cool.
4. Flush mixed material. See Flush Mixed Material,
page 44.
5. Perform Pressure Relief Procedure, page 46. This
includes flushing the system and parking the
metering pumps.
6. Turn main power switch OFF.
7. Clean external surfaces only using a rag soaked in
solvent that is compatible with the spray material
and the surfaces being cleaned.
8. Allow enough time for solvent to dry before using
sprayer.
CA
Non-Hazardous
Location
Hazardous
Location
BA
To Next Page
Loading...
Need help?
General
