Run Mode Screens
26 312779E
Global Flow Control Data Copy
This field allows you to copy flow control data from the
active recipe to all recipes. Press the Enter key to
view the menu, then select Start or Abort. See F
IG
. 16.
Totals Screen
This screen shows the job totals, grand totals, and job
number. Use the tabs to reset job totals (Job Complete),
reset solvent totals (Rst Solvent), or go to Level Control
Screen, page 27.
Solvent Totals and the Rst Solvent tab only appear if
“Meter” is selected under Solvent Monitor in Configure
Screen 5 on page 34.
NOTE: Grand totals are not resettable.
Reset Total Screen
If job is reset, job number will increment by one for
default.
Reset Solvent Screen
The screen will ask if you want to reset solvent total.
Select Yes or No.
F
IG
. 16. Global FC Data Copy
F
IG
. 17. Totals Screen
F
IG
. 18. Reset Total Screen
F
IG
. 19. Reset Solvent Total Screen
Get other manuals https://www.bkmanuals.com
To Next Page
Loading...
