System Operation
80 312779E
System Operation
Operation Modes
Mix
System mixes and dispenses material (apply Mix input).
Standby
Stops the system (remove Mix input).
Purge
Purges the system, using air and solvent (apply Purge
input).
Sequential Dosing
Components A and B dispense sequentially in the nec-
essary volumes to attain the mix ratio.
Dynamic Dosing
In typical operation (ratios 1:1 and above), component A
dispenses constantly. Component B dispenses intermit-
tently in the necessary volume to attain the mix ratio.
Recipe (Color) Change
The process when the system automatically flushes out
the old color and loads a new color. See pages 102-113.
Solvent Push
The Solvent Push feature enables the user to save
some mixed material by pushing it out to the gun with
solvent. The feature requires an accessory solvent
meter. See page 99 for complete information.
Get other manuals https://www.bkmanuals.com
To Next Page
Loading...
