Graco TrueCoat 360 VSP User Manual

Technical Specifications
34 3A9014A
Technical Specifications
California Proposition 65
TrueCoat 360
U.S. Metric
Max Working Pressure 2000 psi
13.8 MPa, 138 bar
Maximum Amperage 2.5 Amps 2.5 Amps
Weight
TrueCoat 360, 360 DS/DSP 3.5 lb (18 in.cord) 1.6 kg (45 cm cord)
TrueCoat 360 VSP 3.75 lb (18 in.cord) 1.7 kg (45 cm cord)
Dimensions:
Length (All models) 12.50 in. 31.75 cm
Width (All models) 5.25 in. 13.34 cm
Height 360, 360 DS/DSP 9.75 in. 24.77 cm
Height 360 VSP 11.8 in. 29.97 cm
Storage Temperature Range ◆❖ 32° to 113° F 0° to 45° C
Operating Temperature Range ✓ 40° to 90° F 4° to 32° C
Storage Humidity Range 0% to 95% relative
humidity,
non-condensing
0% to 95% relative humidity,
non-condensing
Electrical Power Requirement 120 Vac, 60 Hz, 15A, 1 phase
Duty Cycle 50% 50%
Maximum tip orifice 0.015 in. 0.38mm
Wetted materials on all models: stainless steel, brass, polyethylene, carbide, nylon,
polypropylene, fluoroelastomer, acetal, aluminum
◆ Pump damage will occur if fluid freezes in pump.
❖ Damage to plastic parts may result if impact occurs in low temperature conditions.
✓ Changes in paint viscosity at very low or very high temperatures can affect sprayer
performance.
CALIFORNIA RESIDENTS
WARNING: Cancer and reproductive harm –
www.P65warnings.ca.gov.

Graco TrueCoat 360 VSP Specifications

General

Power Source	Electric
Adjustable Speed	Yes
Voltage	120V
Spray Pattern	Adjustable
Nozzle Sizes Included	1
Adjustable Pressure	Yes
Type	Airless
Tip Size	0.015 inches
Orifice Size	0.015 inches
Material	Plastic, Metal
Spray Tip Sizes Included	0.015 inch