Graef DA 506 - Page 26

26
● Insert the plug into the
socket.
● Switch the unit on. The
timer is on 00:00 and
the temperature on
50°C.
● Keep holding the
“START” button for
approx. 3 seconds until
the hour display ashes
up.
● Press “+” or “-” in
order to increase or
decrease the number
of hours. (Maximum 40
hours)
● Then press the
“START” button, the
minute display will then
ash.
● Press “+” or “-” in
order to increase or
decrease the number
of minutes.
● Then press the
“START” button, the
temperature display
will then ash.
● Press “+” or “-” in
order to increase or
decrease the tempera-
ture.
● To conrm, press the
START button again.
● Having done the settings, press again the START button. The green lamp illumi-
nates and the dehydrating process will start.
● After completion of the dehydrating process (timer shows 00.00), switch off
the unit.