Operation
11
Special Features VA 802
Lock (VA 802H)
Feed carriage
Thumb guard
with hand support
T-handle (VA 802H)
2.2.Protective Devices
Device Function
Off button Switches the machine off immediately
Blade guard ring Prevents accidental contact with the blade
Limit stop lock Locks the limit stop when the carriage has been tipped off the machine
Carriage drive starting lockout Prevents the carriage and blade drive from switching on when the
slicing thickness is below “Zero“ or the carriage has been tipped off
(cleaning mode)
Thumb/finger guard Prevents accidental contact with the blade
Chain frame cover Prevents access to the back or catching in the chain tips running to the
blade
Undervoltage mechanism Prevents the machine from starting up again after an interruption to the
power supply, such as a “power cut”
Blade sharpener with guard cover Prevents accidental contact with the blade
Sharpening mode Prevents the carriage drive from being switched on during the
sharpening process. The blade drive can only be switched on and off
using the on and off buttons.
To Next Page
Loading...
