Graef VA 804 - Options; Semi-Automatic Function; Additional Menu Standard Functions; PLU Programming

Operation
14
2.5. Options
Important!You can order the following options in addition to the basic
equipment of the slicing machine when you place your order. This means that none
of the following equipment is part of models VA 802, VA 804 or VA 806. Please
check your order documentation to see which of these options are part of your
machine.
2.5.1. Semi-automatic Function
(model VA 802 only)
x Switching to “semi-automatic“ mode with servo-drive assisted carriage for easy
manual carriage movement
2.5.2. Additional Menu Standard Functions
(for all models)
x Automatic calibre recognition
- Automatic cross section recognition of the food to be sliced
- Automatic adjustment of the carriage run to the cross section of the product
- Automatic adjustment of placing distances for optimum use of the selected
placing pattern
x Placing format
- Entering of the placing pattern L x B for adapting to the selected packaging
(tray, film and so on)
x Counting mode
- Specification of the number of portions
- Specification of breaks during which the food to be sliced is taken off the tray in
continuous mode
- Specification of continuous mode as a standard function
2.5.3. PLU Programming
(for all models)
x Storing up to 100 PLU with the following parameters:
- Placing type (stacking, fanning, ...)
- Number of stacks, rows
- Number of slices
- Number of portions
- Initial position of the placing pattern
- Distance between stacks, rows
!