Cleaning
41
IMPORTANT!
Do not lay removed parts on top of each other. Parts may be damaged.
Only clean the beater and the chain frame with the brush provided. Do not
press too hard.
4.1.1. Disassembly of the Removable Parts
Tray:
x Lift the tray as shown in the picture.
x Move the tray towards the operator and remove
from the machine.
Placing arm:
x Remove the star grip while fixing the placing arm to
the beater rod.
x Take the placing arm from the machine.
Chain frame:
x Swing the pressing roller away from the limit stop with
your right hand.
x Pull the chain frame upwards by the handle with your
left hand and remove it from the machine.
!
1
2
2
1
To Next Page
Loading...
