3) Press the √ to save your changes.
Answering a call
Answering an incoming call
1) If you are not on another phone, lift the handset using, or press the Speaker button
to answer it using the speakerphone, or press the headset button to answer it using
the headset.
2) If you are on another call, press √ button to answer it.
During the conversation, you can convert between Headset, Handset and Speaker
phone by pressing the corresponding buttons or picking up the handset.
Denying an incoming call
Press the X key to deny the incoming call directly.
DND
If users enable the DND function, all the incoming calls will be rejected and the display
shows: icon; you can find the incoming call record in the Call History.
To configure the DND function via Phone interface:
1) Go to ->Features->DND option to enter the configuration interface.
2) Use the navigation keys to choose Enable/Disable.
3) Press the √ button to save the changes.
You can also set DND function by the DND Code:
1) Go to ->Features->DND to enter the configuration interface.
2) Set the DND On Code and the DND Off Code, then press the √ button to save the
changes.
3) When you enable the DND function, the phone will send a message to the server,
and the server will turn on the DND function. Then any calls to the extension will be
rejected by the server automatically. And the incoming call record will not be
displayed in the Call History.
Call Forward
This feature allows you to forward an incoming call to another phone number e.g. a cell
phone or voice mailbox.
The following call forwarding events can be configured:
To Next Page
Loading...
Need help?
General
