Grandstream Networks GRP26 Series Administration Guide

● Screensaver Timeout: Configures the minutesof idle before the screensaver
activates. Valid range is 3 to 60.
– MPK LCD Settings (Available on GRP2614/GRP2616 only):
● MPK LCD Display Order: Choose MPK LCD Display Order whether to be Sequential or
Alternating
● Display Contact on MPK LCD: Enable / Disable Display Contact on MPK Order
– Language and Input:
● Display Language: Selects the language to be displayed on the phone’s LCD. Users could
select Automatic for local language based on IP location if available. By default, it is
Auto.
● Default Input Selection: Selects the Input mode from Multi-Tap and Shiftable. By default,
it is Multi-Tap. — Multi-Tap: User may tap the same key multiple times to switch to the
desired character. —Shiftable: After pressing the number button, user will see the IDs of
the characters that matching to the button. User can select the desired character by
entering the corresponding ID on keypad.
– Date Time:
● Allow DHCP Option 42 to override NTP server
● Allow DHCP Option 2 to override NTP server
● Time Settings
It is used to configure date and time on the phone.
– Search Mode:
Specifies the phonebook search mode to QuickMatch or ExactMatch. By default, it is
QuickMatch.
Phone
Phone sub menu includes the following options:
● SIP: Configures SIP Proxy, Outbound Proxy, SIP User ID, SIP Auth ID, SIP Password, SIP
Transport and Audio information to register SIP account on the phone.
● Call Features:Configures call forward features for Forward All, Forward Busy, Forward
No Answer and No Answer Timeout.
System System sub menu includes the following options:
– Network:
● Internet Protocol :Selects Prefer IPv4 / Prefer IPv6 / IPv4 only or IPv6 only. The default
setting is “Prefer IPv4”.
● IP Setting: Selects IP mode (DHCP/Static IP/PPPoE); Configures PPPoE account ID and
password; Configures static IP address, Netmask, Gateway, DNS Server 1 and DNS
Server 2.
● 802.1X: Enables/Disables 802.1X mode; Configures 802.1x identity and MD5 password.
● Layer 2 QoS: Configures 802.1Q/VLAN Tag and priority value. Select “Reset VLAN
Config” to reset VLAN configuration.
– Wi-Fi Settings (GRP2612W, GRP2614, GRP2615, GRP2616, GRP2624, GRP2634,
GRP2670 & GRP2650 only):
● Enables/disables Wi-Fi: Enables/disables Wi-Fi
● Scan: Enables/disables Wi-Fi
– Bluetooth Settings (GRP2614/GRP2615, GRP2616, GRP2624, GRP2634, GRP2670 &
GRP2650 only):
● Bluetooth Status: Displays the status of Bluetooth
● Bluetooth MAC: Displays the GRP phone’s Bluetooth MAC address.
3. (Bluetooth MAC address is GRP phone’s MAC address plus 1)
● Power: Turns on/off the Bluetooth feature.
● Handsfree Mode: Enables/Disables Handsfree mode
● Bluetooth Name: Specifies GRP phone name when discovered by other Bluetooth devices.
● Start Scan: Starts to scan other Bluetooth devices around the phone. If found, user could
press “Pair” Softkey, and enter Pin code to pair to other Bluetooth devices.
– Web Access:
● Web Access Mode
● HTTP web port

Grandstream Networks GRP26 Series Specifications

General

Brand	Grandstream Networks
Model	GRP26 Series
Category	IP Phone
Language	English