● HTTPs web port
– Upgrade:
● Firmware Server: Configures firmware server for upgrading the phone.
● Config Server: Configures config server for provisioning the phone.
● Upgrade Via: Specifies upgrade/provisioning via TFTP/FTP/FTPS/HTTP/HTTPS.
● Start Provision: Starts Provision immediately.
– Language Download:
● Auto Language Download
● Language Download
– Factory Functions:
● Diagnostic Mode: All LEDs will light up. All keys’ name will display in red on LCD
screen before diagnosing. Press any key on the keypad to diagnose the key’s function.
When done, the key’s name will display in blue on LCD. Lift and put back the handset to
exit diagnostic mode.
● Audio Loopback: Speak to the phone using speaker/handset/headset. If you can hear your
voice, your audio is working fine. Press “Exit” Softkey to exit audio loopback mode.
● LCD on/off: Selects this option to turn off LCD. Press any button to turn on LCD.
● LCD Diagnostic: Selects this option to turn off LCD. Press any button to turn on LCD.
● Certificate Verification: This is used to validate certificate chain for the server’s
certificate.
– UCM Detect:
Detect/connect UCM server to process auto-provision. Manually input the IP and port of the
UCM server phone wants to bind with; Or select from the available UCM server in network.
– Authentication:
● Admin Password: This is used to change the admin password for Web UI access.
● End User Password: This is used to change end user password for Web UI access.
● Settings: Turns on/off Test Password Strength feature. This will allow only passwords with
some constraints to ensure better security.
– Operation:
● Factory Reset: It is used to restore the phone to factory default settings.
● Ping and Traceroute: It is used to show the route taken by packets across to an URL.
● Alternative firmware: It is used to show current and alternative firmware versions
available on the phone. Users can “rollback” to alternative firmware from this menu.
Reboot Reboots the phone.
To Next Page
Loading...
Need help?
General
