Grandstream Networks GRP26 Series Administration Guide

Call Center Status
When set to “Yes”, the phone will send SUBSCRIBE to the server to obtain call center
status. The default setting is “Disabled”.
Note: To activate this feature, users need to change the special feature to Broadsoft and
setup the Broadsoft Call Center to take effect.
Broadsoft Executive Assistant
When enabled, Feature Key Synchronization will be enabled regardless of web settings.
Note: To activate this feature, users need to change the special feature to Broadsoft and
setup the Broadsoft Call Center to take effect.
Broadsoft Call Park
When enabled, it will send SUBSCRIBE to Broadsoft server to obtain Call Park
notifications. The default setting is “Disabled”.
Note: To activate this feature, users need to change the special feature to Broadsoft and
setup the Broadsoft Call Center to take effect.
BLF (Busy Lamp Field)
Presence Eventlist URI
Configures Presence Eventlist URI to monitor the extensions on Multi-Purpose Keys.
If the server supports this feature, users need to configure a Presence Eventlist URI on
the service side first (i.e., presence@myserver.com) with a list of extensions included.
On the phone, in this “Presence Eventlist URI” field, fill in the URI without the domain
(i.e., presence). To monitor the extensions in the list, under Web
GUI🡪Settings🡪Programmable Keys page, please select “Presence Watcher” in the
key mode, choose account, enter the value of each extension in the list.
Eventlist BLF URI
Configures the Eventlist BLF URI on the phone to monitor the extensions in the list
with Multi-Purpose Key. If the server supports this feature, users need to configure an
Eventlist BLF URI on the service side first (i.e., BLF1006@myserver.com) with a list
of extensions included. On the phone, in this “Eventlist BLF URI” field, fill in the URI
without the domain (i.e., BLF1006). To monitor the extensions in the list, under Web
GUI🡪Settings🡪Programmable Keys page, please select “Eventlist BLF” in the key
mode, choose account, enter the value of each extension in the list.
Auto Provision Eventlist BLFs
When option is enabled, empty multi-purpose keys will be automatically provisioned to
the monitored extensions in the “Eventlist BLF” or “Presence Eventlist”.
● Disabled
● BLF Eventlist
● Presence Eventlist
The default setting is “Disabled”.
BLF Call-pickup
Configures BLF Call-pickup method:
● Auto: The phone will do either Prefix or barge in code for BLF pickup depend on
which on is set.
● Force BLF Call-pickup by prefix: The phone will only use Prefix as BLF pickup
method.
● Disabled: The phone will ignore both BLF pickup method, now the monitored VPK
will only dial the extension if pressed.
The default setting is “Auto”.
BLF Call-pickup Prefix
Configures the prefix prepended to the BLF extension when the phone picks up a call
with BLF key. The default setting is **.
Call Pickup Barge-In Code Set feature access code of Call Pickup with Barge-In feature.
Call Park Feature Code
Configures the feature access code for parking current call to parking lot or another
extension.
Call Park Retrieve Feature Code Configures the feature access code for parking current call to parking lot or another

Grandstream Networks GRP26 Series Specifications

General

Brand	Grandstream Networks
Model	GRP26 Series
Category	IP Phone
Language	English