Grandstream Networks GRP26 Series Administration Guide

● Not found (404).
● Decline (603).
Default setting is “Temporarily Unavailable (480)”.
DND Override
Allows the phone to accept certain incoming calls while set to DND mode.
● Off: all incoming calls will not be accepted.
● Allow all: all incoming calls will be allowed.
● Allow Only Contacts: only incoming calls from numbers in the local phonebook will be
accepted.
● Allow Only Favorites: only incoming calls from favorite numbers in the local phonebook
will be accepted.
The default setting is “Off”.
Conference
Enable Conference Enables the Conference feature. The default setting is "Yes".
BLF
Enable BLF Pickup Screen
By enabling BLF Pickup Screen, when monitored BLF is ringing,
GRP261x/GRP2624/GRP2634/GRP2670/GRP2650 will pop up a BLF information window.
The default setting is “No”.
Enable BLF Pickup Sound
Gives the user the ability to set sound notification to the monitoring BLF line when it’s
ringing, GRP261x/GRP2624/GRP2634/GRP2670/GRP2650 will play a sound to inform user.
The default setting is “No”.
BLF Pickup Sound Except List
Configures the list to be playing BLF sound notification for “All Except” extensions in the list
[BLF Pickup Sound Except List] or “Only Allow” extensions in the list [BLF Pickup Sound
Only List].
The default setting is “Allow Except”.
Hide BLF Remote Status
Allows users to hide the Caller ID from showing at the BLF VPK and MPK.
● No: The VPK will flash between the Caller ID and the BLF account.
● Yes: The VPK will stay under the monitored account and only notify that there is an
incoming call.
The default setting is “No”.
IM
Enable IM Popup
If set to “No”, phone will not show a pop up when receiving an IM.
The default setting is “Yes”.
Instant Message Popup Timeout
Configures the number of seconds that the message will remain on screen. The valid range is
10 – 900.
The default setting is “10”.
Play Tone On Receiving IM
If enabled, phone will play a short tone when receiving an IM during idle state.
The default setting is “Disabled”.
Call Features
Enable Active MPK Page
When the option is enabled, Active MPK Page on the extension boards will be disabled.
The default setting is “No”.
Enable Active VPK Page Enables Active VPK Page to be displayed on LCD when there are active VPKs.

Grandstream Networks GRP26 Series Specifications

General

Brand	Grandstream Networks
Model	GRP26 Series
Category	IP Phone
Language	English