The default setting is “No”.
Enable Call Recording LCD Indicator
Configures whether to show the call recording indicator on LCD for local and remote call
recording.
Enabled by Default.
Local Call Recording Feature
Gives the ability to record calls locally while on the call screen.
The default setting is “Disabled”.
Note: The IP phone displays a prompt when the storage for recording files is almost full. This
alert helps users manage the space by deleting or transferring recordings to avoid storage
issues.
Default call log type
Sets the default call log list after select MENU🡪CALL HISTORY.
Broadsoft Call Log or Local Call Log option will only show its own list. Default option will
keep both call log lists.
The default setting is “Default”.
Saved Local Call Recording Location Configures location where the recordings will be stored.
Replace the oldest call record
When enabled, the oldest call record will be replaced with the newest one when the storage is
full. If the option is disabled, the call recording feature will stop recording automatically.
Default is “Disabled”.
Download Local Call Recordings When there are recordings presented, you may download them here.
Settings 🡪 Ringtone
Call Progresses Tones:
● System Ring Tone
● Dial Tone
● Second Dial Tone
● Message Waiting
● Ring Back Tone
● Call-Waiting Tone
● Busy Tone
● Reorder Tone
Configures ring or tone frequencies based on parameters from local telecom. The default value
is North American standard. Frequencies should be configured with known values to avoid
uncomfortable high pitch sounds.
Syntax: f1=val,f2=val[,c=on1/off1[-on2/off2[-on3/off3]]];
(Frequencies are in Hz and cadence on and off are in 10ms)
ON is the period of ringing (“On time” in ‘ms’) while OFF is the period of silence.
In order to set a continuous ring, OFF should be zero. Otherwise it will ring ON ms and a
pause of OFF ms and then repeat the pattern. Up to three cadences are supported.
Call Waiting Tone Gain
Configures the call waiting tone gain to adjust call waiting tone volume (Low, Medium or
High). The default setting is “Low”.
Speaker Ring Volume
Configures speaker ring volume.
The valid range is 0 to 7.
The default setting is 5.
Notification Tone Volume
Configures notification tone volume.
The valid range is 0 to 7 and default setting is 5.
Call Tone Volume Used to configure the call tones’ level in dB. Values range from -15 to 15.
Lock Speaker Volume
Lock volume adjustment when the option is enabled so it cannot be changed from phone LCD.
The option can be set to: “No”, “Ring”, “Talk” or “Both”.
Default setting is “No”.
Default Ringtone Allows to set Default Ringtone as their Global ringtone.
Note: The ring tone set in individual accounts have higher priority to this setting. If the user
wants the default ring tone to be used globally, he needs to set the ring tone of each account to
Default Ring Tone; Otherwise, it will be whichever the ring tone you set.
To Next Page
Loading...
Need help?
General
