Grandstream Networks GRP26 Series Administration Guide

Download User
configuration
This allows users to download part of the configuration that does not include any personal settings like
Username and Passwords. Also, it will include all the changes manually made by user from web UI, or config
file uploaded from “Upload Device Configuration”, but not include the changes from the server provision via
TFTP/FTP/FTPS/HTTP/HTTPS.
Upload Device
Configuration
Uploads configuration file to phone.
Export backup
Package
Export backup package which contains device configuration along with personal data.
Restore from Backup
package
Click to upload backup package and restore.
Configure via Network
Config Upgrade Via
Allows users to choose the config upgrade method: TFTP, FTP, FTPS, HTTP or HTTPS.
The default setting is “HTTPS”.
Config Server Path
Defines the server path for provisioning.
Note: Protocol header can be added in the Config Server path (Eg:https://) without the need to configure it on
the "Config Upgrade via" parameter, once configured, it will overide the selection on the "Config Upgrade via"
Config Server
Username
The username for the HTTP/HTTPS server.
Config Server
Password
The password for the HTTP/HTTPS server.
Always Authenticate
Before Challenge
Only applies to HTTP/HTTPS. If enabled, the phone will send credentials before being challenged by the server.
Config File Prefix
Enables your ITSP to lock configuration updates. If configured, only the configuration file with the matching
encrypted prefix will be downloaded and flashed into the phone.
Config File Postfix
Enables your ITSP to lock configuration updates. If configured, only the configuration file with the matching
encrypted postfix will be downloaded and flashed into the phone.
Authenticate Conf
File
Authenticates configuration file before acceptance.
XML Config File
Password
The password for encrypting XML configuration file using OpenSSL. This is required for the phone to decrypt
the encrypted XML configuration file.
Provision
Auto Upgrade
Automatic Upgrade
Enables automatic upgrade and provisioning.
The default setting is “No”.
Automatic Upgrade
Check Interval (m)
Specifies the time period to check for firmware upgrade (in minutes). The default value is 10080
Hour of the Day(0-23)
Defines the hour of the day to check the HTTP/TFTP/FTP server for firmware
Upgrade or configuration files changes. The default value is 1.

Grandstream Networks GRP26 Series Specifications

General

Brand	Grandstream Networks
Model	GRP26 Series
Category	IP Phone
Language	English