Grandstream Networks GRP2616 Administration Guide

GRP2600 Administration Guide
Version 1.0.5.15
P a g e | 64
Instant Message
Popup Timeout
Configures the number of seconds that the message will remain on screen.
The valid range is 10 – 900. The default setting is “10”.
Play Tone On
Receiving IM
If enabled, phone will play a short tone when receiving an IM during idle
state. Default setting is “Disabled”.
Allow Incoming Call
Before Ringing
This allows incoming calls after dialed but before ringing. This can be used
under custom user configuration based on need. Default setting is “No”.
User-Agent Prefix
Configures the prefix in the User-Agent header.
Auto Provision List
Starting Point
Users could select “VPK” or “MPK” which will be used first when the phone
is being automatically provisioned with Eventlist BLF. The default setting is
“VPK”. This feature is supported only on GRP2614.
Hide BLF Remote
Status
Allows users to hide the Caller ID from showing at the BLF VPK and MPK.
• No: The VPK will flash between the Caller ID and the BLF account.
• Yes: The VPK will stay under the monitored account and only notify that
there is an incoming call.
The default setting is “No”.
Show SIP Error
Response
Shows SIP error response information on LCD screen. The default setting is
“Yes”.
Enable Missed Call
Notification
Allows users to show/hide the notification popup for missed calls.
The default setting is “Yes”.
Note: Currently the manually rejected calls are counted as missed calls.
Enable Call
Completion Service
When the automatic redial and call completion service are enabled, and the
user makes a call to callee, when the callee is busy at the moment, phone
will monitor callee’s status. Once the callee is available, phone will ask if user
wants to redial again. The default setting is “No”.
Enable Incoming Call
Popup
If set to “Yes”, phone will pop up an incoming call window to notify the call.
If set to “No”, there will be no notification pop up on LCD when there is an
incoming call. This way users will not get disrupted by unexpected popup
call but still get notified by the flashing line LED.
The default setting is “Yes”.
Enable Enhanced
Acoustic Echo
Canceller
Enables/Disables Enhanced Acoustic Echo Canceller (EAC) providing
acoustic echo reduction which is required for full-duplex handsfree speaker
phone functions on the phone. The default setting is “Yes”.
Auto Answer Delay
Configure the delay for automatically answering the incoming call. Valid
range is 0 to 10 (second). The default value is 0 (which means auto answer
is disabled).
Settings → Multicast Paging

Grandstream Networks GRP2616 Specifications

General

Brand	Grandstream Networks
Model	GRP2616
Category	IP Phone
Language	English