Grandstream Networks GXP1160 User Manual

FIRMWARE VERSION 1.0.7.4 GXP1160/GXP1165 USER MANUAL Page 24 of 67
the first call on hold.
Note:
 To transfer calls across SIP domains, SIP service providers must support transfer across SIP domains.
 When two lines are active, GXP116x can only do attended transfer because the phone supports at
most two lines simultaneously.
3-WAY CONFERENCING
GXP1160/GXP1165 can host 3-way conference call with another 2 parties (PCMU/PCMA).
 Initiate a conference call.
 Establish calls with 2 parties respectively;
 Press CONF key ;
 Press FLASH key . The 3-way conference will be established.
 Cancel Conference.
 The user can press the "Cancel" softkey to cancel a conference after pressed CONF key .
 This will resume the 2-way conversation with the current line.
 Split and Re-conference.
 During the conference, press HOLD key. The conference call will be split and the calls will be put
on hold separately;
 Press FLASH key to resume the 2-way conversation with the second established call;
 If users would like to re-establish conference call, before FLASH key is pressed in the
above step, press the ReConf softkey right after the conference call is held/split;
 End Conference.
 Press HOLD key to split the conference call. The conference call will be ended with both
calls on hold; Or
 Users could press the EndCall softkey or simply hang up the call to terminate the conference call.
GXP1160/GXP1165 supports Easy Conference Mode, which can be used combined with the traditional
way to establish the conference.

Grandstream Networks GXP1160 Specifications

General

Brand	Grandstream Networks
Model	GXP1160
Category	IP Phone
Language	English