Grandstream Networks GXP1160 User Manual

FIRMWARE VERSION 1.0.7.4 GXP1160/GXP1165 USER MANUAL Page 61 of 67
Figure 7: Web GUI - Phonebook->Contacts
Figure 8: Click-to-Dial
SAVING THE CONFIGURATION CHANGES
After users makes changes to the configuration, press the "Save" button will save but not apply the
changes until the "Apply" button on the top of web GUI page is clicked. Or, users could directly press
"Save and Apply" button. We recommend rebooting or powering cycle the phone after applying all the
changes.
REBOOTING FROM REMOTE LOCATIONS
Press the "Reboot" button on the top right corner of the web GUI page to reboot the phone remotely. The
web browser will then display a reboot message. Wait for about 1 minute to log in again.
Add contacts.
Edit contact.
Click to call this contact
from the phone.
Click to dial from
available lines.

Grandstream Networks GXP1160 Specifications

General

Brand	Grandstream Networks
Model	GXP1160
Category	IP Phone
Language	English