Grandstream Networks GXP1160 User Manual

FIRMWARE VERSION 1.0.7.4 GXP1160/GXP1165 USER MANUAL Page 25 of 67
 Initiate a conference call.
 Establish 1 call;
 Press CONF key and a new line will be brought up;
 Dial the number and press SEND key to establish the second call;
 Press CONF key or press the ConfCall softkey to establish the conference.
 Split and Re-conference.
 During the conference, press HOLD key . The conference call will be split and both calls
will be put on hold separately;
 Press FLASH key to resume the 2-way conversation with the second established call;
 If users would like to re-establish conference call, press the ReConf softkey.
 Cancel Conference.
 If users decides not to conference after establishing the second call, press EndCall softkey;
 This will end the second call and the screen will show the first call on hold.
 End Conference.
 Press HOLD key to split the conference call. The conference call will be ended with both
calls on hold; Or
 Users could press the EndCall softkey or simply hang up the call to terminate the conference call.
Note:
 The party that starts the conference call has to remain in the conference for its entire duration, you can
put the party on mute but it must remain in the conversation. Also, this is not applicable when the
feature "Transfer on Conference Hangup" is turned on.
 The option "Disable Conference" has to be set to "No" to establish conference.
 When using Easy Conference Mode, use SEND key to dial out the second call instead of
using #, even when # could be used as SEND in normal phone calls.
VOICE MESSAGES (MESSAGE WAITING INDICATOR)
A blinking red MWI (Message Waiting Indicator) indicates a message is waiting. Dial into the voicemail box
to retrieve the message by entering the voice mail number of the server or pressing the MESSAGE key

Grandstream Networks GXP1160 Specifications

General

Brand	Grandstream Networks
Model	GXP1160
Category	IP Phone
Language	English