FIRMWARE VERSION 1.0.7.4 GXP1160/GXP1165 USER MANUAL Page 49 of 67
default setting is in 12-hour format.
Configures to enable or disable weather update on the phone. The
default setting is "Yes". If set to "No", the weather information screen will
not show.
Configures weather city code for the phone to look up the weather
information. The default setting is "Automatic" and the weather
information will be obtained based on the IP location of the phone if
available. Otherwise, specify the self-defined city code. For example,
USCA0638 is the city code for Los Angeles, CA, United States.
Specifies the weather update interval (in minutes). The default value is
15 minutes.
Specifies the degree unit for the weather information to display on the
phone.
Settings -> XML Applications
Configures to enable idle screen XML download. Users could select
HTTP/HTTPS/TFTP to download the XML idle screen file. The default
setting is "No".
Download Screen XML At
Bootup
If set to "Yes", the idle screen XML file will be downloaded when the
phone boots up. The default setting is "No".
Specifies the custom file for the idle screen XML file to be downloaded.
Idle Screen XML Server Path
Configures the server path to download the idle screen XML file. This
field could be IP address or URL, with up to 256 characters.
Network -> Basic Settings
Selects Prefer IPv4 or Prefer IPv6.
Allows users to configure the appropriate network settings on the phone
to obtain IPv4 address. Users could select "DHCP", "Static IP" or
"PPPoE". By default, it is set to "DHCP".
DHCP Host name (Option 12)
Specifies the name of the client. This field is optional but may be required
by some Internet Service Providers.
DHCP Vendor Class ID
(Option 60)
Used by clients and servers to exchange vendor class ID.
Enter the PPPoE account ID.
To Next Page
Loading...
