FIRMWARE VERSION 1.0.7.4 GXP1160/GXP1165 USER MANUAL Page 58 of 67
Enter the city name in the search field. For example, Boston, MA. And click on "SEARCH";
The searching result will show in a new window with URL in the browser's address bar. For example,
http://www.weather.com/weather/right-now/Boston+MA+USMA0046
In the above link, USMA0046 is the city code to be filled in "Self-Defined City Code" option.
Users could then further configure the "Update Interval" and "Degree Unit" for weather information
display.
PUBLIC MODE
The GXP1160/GXP1165 supports hot desking using public mode. Under public mode, users could login
the phone with the SIP account User ID and password. Please follow the steps below to configure the
phone for public mode:
Fill up the SIP server address for Account 1 first;
Under Web GUI->Settings->General Settings, set "Public Mode" option to "Yes". Click "Save and
Apply" and reboot the phone;
When the phone boots up, SIP User ID and Password to register to the configured SIP server in
account 1 will be required. Enter the correct account information to log in to the phone. When entering
the account information, press softkey "123"/"abc" to toggle input method;
In login page, pressing CONF button on the phone will show phone's IP address;
After using the phone, go to LCD MENU->LogOut to log off the public mode.
MULTICAST PAGING
GXP116x supports multicast paging listening. On the phone, users could send multicast page by setting
the multicast address and port. Also, users can listen to at most 10 different multicast IP address.
Receive Multicast Paging
To receive multicast page, GXP116x must be well configured to listen to the right address and port. The
configurations are under Settings->Multicast Paging. There are 10 listening address supported with
priority levels 1 to 10. Optionally, each of these addresses can also have a label that will display on LCD
when the page is received.
Note: The multicast page configuration requires rebooting to take effect.