FIRMWARE VERSION 1.0.7.4                            GXP1160/GXP1165 USER MANUAL                                    Page 34 of 67 
                                                                 
 
CONFIGURATION VIA WEB BROWSER 
 
The  GXP1160/GXP1165  embedded  Web  server  responds  to  HTTP/HTTPS  GET/POST  requests. 
Embedded HTML pages allow a user to configure the IP phone through a Web browser such as Microsoft’s 
IE, Mozilla Firefox and Google Chrome. 
 
To access the Web GUI: 
 
1.  Connect the computer to the same network as the phone; 
2.  Make sure the phone is turned on and shows its IP address. You may check the IP address on the 
LCD by pressing NextScr softkey or go to MENU->Status->Network Status; 
3.  Open a Web browser on your computer; 
4.  Enter the phone’s IP address in the address bar of the browser; 
5.  Enter the administrator’s login and password to access the Web Configuration Menu. 
 
Note: 
  The computer has to be connected to the same sub-network as the phone. This can be easily done by   
connecting  the computer to  the same  hub or  switch  as  the  phone  connected  to. In  absence  of a 
hub/switch (or free ports on the hub/switch), please connect the computer directly to the PC port on the 
back of the phone; 
  If the phone is properly connected to a working Internet connection, the IP address of the phone will 
display in MENU->Status->Network Status. This address has the format: xxx.xxx.xxx.xxx, where xxx 
stands for a number from 0-255. Users will need this number to access the Web GUI. For example, if 
the phone has IP address 192.168.40.154, please enter "http://192.168.40.154" in the address bar of 
the browser; 
  There are two default passwords for the login page: 
The password is case sensitive with maximum length of 25 characters.   
  When changing any settings, always SUBMIT them by pressing the "Save" or "Save and Apply" button 
on the bottom of the page. If the change is saved only but not applied, after making all the changes, 
click on the "APPLY" button on top of the page to submit. After submitting the changes in all the Web 
GUI pages, reboot the  phone  to  have the  changes  take  effect  if  necessary (All  the  options  under 
"Accounts" page and "Phonebook" page do not require reboot. Most of the options under "Settings" 
page do not require reboot).