USB devices can be connected via the USB port. For example,
connect a USB flash drive to save captured pictures.
Connecting and Setting Up the GXV3370
The GXV3370 can be installed on the desktop using the built-in stand or attached on the wall using the
slots for wall mounting.
Using the Phone Stand
The GXV3370 has a built-in phone stand. To set up the GXV3370 as your desk phone, follow the steps
below:
1. Take the phone stand out on the back and adjust the angle to place the phone steady on the desk;
2. Connect the handset and main phone case with the phone cord;
3. Connect the LAN port of the phone to the RJ-45 socket of a hub/switch or a router (LAN side of the
router) using the Ethernet cable;
To Next Page
Loading...
Need help?
General
