Grandstream Networks GXV3380

GXV3380 Administration Guide
Version 1.0.1.19
P a g e | 51
Call Log
Categorizes the call logs saved for this account.
 If it is set to “Log All”, all the call logs of this account will be saved.
 If set to “Log Incoming/Outgoing Calls (Missed Calls Not
Record)”, the whole call history will be saved other than missed
call.
 If it is set to “Disable Call Log”, none of the call history will be
saved.
 If it is set to “Do Not Prompt Missed Call”, the phone will log the
missed call histories, but there is no prompt to indicate the missed
calls on phone LCD.
The default setting is “Log All”.
Enable Call Features
Configures the local start command feature. If it is set to “Yes”, the feature
will be enabled to recognize the local star code command. Otherwise, it will
be disabled. The default setting is “No”.
Mute on Answer
Intercom Call
When enabled, phone will mute the incoming intercom call based on Call-
Info/Alert Info Headers. Default is disabled.
Transfer on
3-way Conference Hang
up
Transfers conference from hosted party when hang up, thus other parties
can continue the conference without interruption.
The default setting is unchecked.
Use # as Dial Key
Treats “#” as the “Send” (or “Dial”) key when set to “Yes”. If set to “No”, this
“#” key can be included as part of the dialed number or it will be used as
redial key when the input area has no number (please make sure the dial
plan is properly configured to allow dialing # out). Default is “Yes”.
Use # as Redial Key
Allows users to configure the "#" key as the "Redial" key. If set to "Yes", the
"#" key will immediately redial the last call. In this case, this key is essentially
equivalent to the "Redial" key. If set to "No", the "#" key is treated as part of
the dialed string. Default is “Yes”.
DND Call Feature On
Configures the feature code to enable the DND (Do Not Disturb) feature
for this account. If it is configured, the phone will dial the feature code
automatically when the DND feature is enabled.
DND Call Feature Off
Configures the feature code to disable the DND (Do Not Disturb) feature
for this account. If it is configured, the phone will dial the feature code
automatically when the DND feature is disabled.
No Key Entry Timeout
(s)
Determines the expiration timer (in seconds) for no key entry. The dialed
digit will be sent out if no other digits entered within the set period. The
default value is 4 seconds. The valid range is 1 - 15. This feature does not
work if the dialer page is entered via the Account Widget on the phone.
Ring Timeout (s)
Defines the expiration timer (in seconds) for the rings with no answer.
The default setting is 60. The valid range is from 10 to 300.