Grandstream Networks GXV3380

GXV3380 Administration Guide
Version 1.0.1.19
P a g e | 92
The default setting is "No".
Enable Barge-in
Enables/disables the Barge-In feature. If it is set to "Yes", the user could
tap the SCA account to barge into an active session with another shared
line. The default setting is "No".
Auto-filling CallPark
Feature Code
Sets if the phone system will add the configured feature code to park calls.
If it is set to "Yes", the "CallPark Feature Code" configured will be
automatically prepended on the phone's dial pad when parking calls. The
default setting is "Yes".
CallPark Feature Code
Configures the callpark feature code. If "Auto-filling CallPark Feature
Code" is set to "Yes", this feature code will be automatically filled in on the
dial pad when parking a call.
Line Seize Timeout (s)
Defines line-seize expiration timer. For Shared Call Appearance, the
phone must send a SUBSCRIBE request for the line-seize event package
whenever a user attempts to take the shared line off hook. The default
value is 15 seconds. The valid range is from 15 to 60.
Value-added Service/Broadsoft Directories
XSI Service Settings
Authentication Type
Defines the authentication type in way of login or use SIP. If set to "Login
Credentials", please fill in Username and Password in the following
options; if set to "SIP Credentials", please fill in Username, User ID, and
Password. The default setting is "SIP Credentials".
Server
Configures the BroadWorks Xsi server URI. If the server uses HTTPS,
please add the header “HTTPS” ahead of the Server URI. For instance,
“https://SERVER_URI”.
Port
Configures the BroadWorks Xsi server port. The default port is 80. If the
server uses HTTPS, set to 443.
Action Path
Configures Action path for BroadSoft XSI server.
BroadWorks User ID
Determines the User ID for Broadsoft XSI server.
SIP Authentication ID
Determines username for Broadsoft XSI server.
SIP Authentication
Password
Determines password for Broadsoft XSI server.
Login Password
Specifies the password for the BroadWorks XSI query.
BroadSoft Directory &
Call Logs Update Interval
(s)
Configures the interval to obtain BroadSoft call log and directory data thus
to update the matching number data on the dialing interface. Default is
1800 seconds.
BroadSoft Directory Hits
Configures the maximum hits returned from the BroadSoft XSI server
directory. The valid range is from 1 to 1000. If set to blank, server's default
value will be used.