Grandstream Networks GXV3380

GXV3380 Administration Guide
Version 1.0.1.19
P a g e | 70
It can be selected from the drop-down list.
 Normal (YYYY/M/D): 2019/1/31
 YYYY/MM/DD: 2019/01/31
 MM/DD/YYYY: 01/31/2019
 DD/MM/YYYY: 31/01/2019
The default setting is “Normal (YYYY/M/D)”.
Language
Language
Sets the language to display on the phone's LCD.
Select Language File
Press "Browse" to bring up a file selection menu to select the local .txt file
to upload to the phone.
System Settings/Security Settings
Web/SSH Access
Enable SSH
Allows SSH access to the phone.
The default setting is "Yes".
SSH Port
Customizes SSH port to access to the phone. Default is “22”.
Access Method
Determines which protocol will be used to access the phone ‘s Web GUI.
It can be selected from HTTP and HTTPS.
The default setting is HTTP.
Port
Specifies which port to use to access the phone ‘s Web UI. By default, if
HTTP, the port number will be 80; if HTTPS is selected, the port number
will be 443.
Configuration via
Keypad Menu
Configures access control for keypad Menu settings on the Settings
interface of the phone.
 Unrestricted: configure all settings on the Settings interface;
 Basic Settings Only: The Advanced Settings option will not be
displayed;
 Basic Settings & Network Settings: Only the Advanced Settings
option will not be displayed
 Constraint Mode: users need to input admin user password to
configure Wireless & Network and Advanced Settings.
Note: When access control for keypad is limited to “Basic Settings Only”
or “Constraint Mode”, the Admin authentication will be mandatory to start
Factory Reset process.