Grandstream Networks GXV3380

GXV3380 Administration Guide
Version 1.0.1.19
P a g e | 69
Note: VLAN tag value on the device connected to the PC port should be
the same as the VLAN tag value assigned to the PC port here.
PC Port Priority Value
Determines the Priority Code Point within a Layer 2 frame header for PC
port.
Proxy
HTTP/HTTPS Proxy
Hostname
Configures the HTTP/HTTPS proxy URI of the network. Some of networks
requires going through a proxy to access to the Internet. The default setting
is keeping this field blank.
HTTP/HTTPS Proxy Port
Configures the HTTP/HTTPS proxy port number of the network. Some of
networks requires going through a proxy to access to the Internet. The
default setting is keeping this field blank.
Bypass Proxy For
Defines the specific URI that the phone can directly access to without
HTTP/HTTPS proxy. If it is filled, the phone will bypass the proxy to send
the packets to the specific URI. The default setting is filed blank.
Remote Control
CSTA Control
Indicates whether CSTA Control feature is enabled. Change of this
configuration will need the system reboot to make it take effect.
System Settings Page Definitions
System Settings/Time and Language
Time Settings
Assign NTP Server
Address
Defines the URL or IP address of the NTP server. The phone may obtain
the current date and time information from the server. The default setting
is “pool.ntp.org”.
DHCP Option 42
override NTP server
Obtains NTP server address from a DHCP server using DHCP Option 42;
it will override configured NTP Server. If set to “No”, the phone will use
configured NTP server to synchronize time and date even if a NTP server
is provided by DHCP server. The default setting is "Yes".
DHCP Option 2 to
override Time Zone
setting
Obtains time zone setting (offset) from a DHCP server using DHCP Option
2; it will override selected time zone.
If set to “No”, the phone will use selected time zone even if provided by
DHCP server. The default setting is Yes.
Time Zone
Specifies the local time zone for the phone. It covers the global time zones
and user can selected the specific one from the drop-down list.
Time Display Format
Specifies which format will be used to display the time. It can be selected
from 12-hour and 24-hour format.
Date Display Format
Determines which format will be used to display the date.