GXV3380 Administration Guide
Version 1.0.1.19
P a g e | 60
Determines if the speaker will play the ringtone if the speaker channel is
not set as default channel. If set to “Yes”, the phone will force to play the
ring speaker in speaker channel. The default setting is “No”.
End user might need this feature when the headset is connected.
Configures the User ID/extension to dial automatically when the phone is
off-hook. The phone will use the first account to dial the configured
numbers out.
The default setting is “No”.
Offhook Auto Dial Delay
(s)
Defines the timer for warm line dialing. After the timer expires, the phone
system will dial the configured number in Off-hook Auto Dial automatically.
If it is not configured, the configured number will be dialed immediately.
Offhook/OnHook
Timeout (s)
If configured, the phone will exit the dial-up screen when timeout after
Offhook or Onhook. default is 30s.
The valid range is 10-60s.
Configures the Handset options and can be set to:
If set to “Enable”: when off hook, the phone will enter into the dial
screen, and the media channel will switch to the handset; no matter if
any third app is opening.
If set to “Disable”: The Handset will be disabled.
If set to “Auto”: when the 3rd-party application is calling, only the media
channel will switch to the handset when off hook; otherwise, the phone
will enter into the dial screen, and the media channel will switch to the
handset.
Default setting is “Auto”.
Auto UnHold When
Press the Line Key
Configures when there are multiple lines, whether to UnHold the line
automatically when click the line being held and hold the line in the primary
call. Note: the hold situation which is set manually will not be put on hold
automatically. The default setting is "No".
Virtual Account Group
Avaya Mode
If set to "Yes", when processing SIP Register 3XX Response, it will parse
the address site in 3XX, modify the account server info "SIP Server: port"
& "SIP Transaction" in virtual account group and initiate registration again.
This feature is designed for the Avaya customers.
Virtual Account Group
Concurrent Registration
Configures the amount of concurrent accounts in virtual account group. If
the total amount of virtual group accounts is "N", the number of accounts
the user sets is "n", then the phone will register the first n accounts; If
registration for all of these accounts failed, then register the last N-n
accounts. The default value is 2.
Sets the characters for filter when dial out numbers. Users could set up
multiple characters. For example, if set to “[()-]”, when dial (0571)-8800-
8888, the character “()-“ will be automatically filtered and dial
057188008888 directly.
To Next Page
Loading...
