Grandstream Networks GXV34 0 Series

Maintenance/Upgrade/Config File
Upload Firmware File To Update Allows users to load the local rmware to the phone to update the rmware.
Upgrade via Network
Firmware Upgrade Mode
Allows users to choose the rmware upgrade method: TFTP, HTTP, HTTPS or Manual
Upload.
The default setting is “HTTPS”.
Firmware Server Path
Sets IP address or domain name of rmware server. The URL of the server that hosts the
rmware release.
Default is “fm.grandstream.com/gs”.
HTTP/HTTPS Username Enters the user name for the rmware HTTP/HTTPS server.
HTTP/HTTPS Password Enters the password for the rmware HTTP/HTTPS server.
Firmware File Prex
Checks if rmware le is with matching prex before downloading it. This eld enables
user to store different versions of rmware les in one directory on the rmware server.
Firmware File Postx
Checks if rmware le is with matching postx before downloading it. This eld enables
user to store different versions of rmware les in one directory on the rmware server.
Upgrade Detection
Update Detect
Click the “Update Detect” button to check whether the rmware in the rmware server has
an updated version, if so, update immediately.
Congure Manually
Download Device Conguration
Downloads the phone’s conguration le in text format. The cong le includes all the P
value parameters for phone’s current settings except password for security purpose.
Users can use the Grandstream conguration le generator to generate binary cong le
from this text le.
Upload Device Conguration
Uploads conguration le to the phone.
Notes:
•The GXV34x0 supports only txt format for cong le upload.
•Reboot is required to take effect.
Congure via Network
Use Grandstream GAPS
It is used to congure the download path and update mode for the conguration le
server.
● If set to “Yes“, the device will set the download path of the conguration le to
“fm.grandstream.com/gs” by default and use HTTPS protocol to connect to the
server.
● If set to “No“, then users can manually congure the path and update mode for the
conguration le server.
Cong Update Mode Selects provisioning method: TFTP, HTTP or HTTPS. Default setting is “HTTPS”.
Cong Server Path Sets IP address or domain name of conguration server. The server hosts a copy of the
conguration le to be installed on the phone.
Users can also congure variables in the provisioning server URL; The function allows
users to congure a unied provisioning server URL for different phone models. Currently,