Grandstream Networks GXV34 0 Series

Table 47: Extension Boards
Applications/Contacts
General Settings
Sort Phonebook by Sets which part of name, first name or last name, will be sorted in alphabetical order to display.
Default Contacts
Tab
Controls the behaviors of the phonebook key. It could be set to:
Default
LDAP Search
Local Phonebook
Local Group
Broadsoft Phonebook
Favorites.
The default setting is “Default”, which set the phonebook key to the Contacts menu.
Congure Congures the Number list when key mode is set toQuick Conference.
General Settings
General Settings
One Page Display
Mode
Congures whether to enable one page display mode. If set to "Yes", each extension board only shows
20 programmable keys, so keys 1-80 will be displayed on 4 extension boards.
Sync Backlight
with LCD
Congures whether to synchronize the backlight with LCD. If set to "Yes", the backlight will turn off when
LCD is in idle
EXT Sync Prompt When accessing EXT, congures whether to pop up the EXT synchronization prompt.
Enable Active MPK
Page
When enabled, GBX20 will auto swtich to the page that there are active MPKs.When unchecked, the user
needs to press the GXB20 buttons to switch MPK pages. It is enabled by default.
Hide BLF Remove
Status
Congures to hide the status information of the monitored line.When checked, BLF LED would not
update whether they are in a call or have an incoming/outgoing call.It is disabled by default.
Proxy Prex
Account Displays account name if congured, otherwise, displays “Account X” where X is the account number.
BLF Call-pickup
Prex
Congures the prex prepended to the BLF extension if the phone answers a call to the monitored party
by the BLF key. Default setting is ** for each account.
Eventlist BLF URI
Determines the event list BLF URI on the phone to monitor the extensions in the list with MPK keys. This
feature is based on BroadSoft standard. It requires lling in the BLF ID to the box.
For example, if the server provides the URI: BLF123@myserver.com, this eld should be lled with
BLF123. Then the monitored extensions will be populated in the MPK app or Extension Board (if
supported).
Force BLF Call-
pickup by Prex
Uses the prex for BLF Call-pickup. The default setting is “No”.